Nitto RP301 protective film 
 Electronic, optical components with a surface protection material 

 E-MASK RP300/RP301 the optical film with a surface protection material with anti-static function can be attached to the protective material on the state, the optical film visual inspection. 
 Summary E-MASK RP300/RP301 PET film is used as the substrate in the production of clean environment with anti-static function of the optical film with a surface protection material. 
 Feature 
 ■ due to the colorless and transparent, so the material can be pasted in the protection of the state on visual inspection of the optical film. 
 ■ for the optical film has a good wetting, has a good job of re-paste. 
 ■ protective material can easily wipe the back of the binder. (RP300) 
 ■ can be sealed in protective material on the back or inkjet printing. (RP301) 
 ■ use polarized light plate for surface protection. 
 General Characteristics 
 Item Thickness (mm) ※ 1 adhesion (N/20mm) ※ 2 
 E-MASK RP300 0.059 0.25 
 E-MASK RP301 0.059 0.25 
 [Test method] 
 * 1 Nominal thickness. 
 * 2 with reference to JIS Z-0237 standard (Adherent: stainless steel plate, Tensile speed: 300mm/min, Peeling angle: 180 degrees). 
 Notes 
 Avoid sunlight, kept at constant temperature and humidity to properly place. 
 1 paste Do not press too, so paste it after the film from both ends of the tilt. 
 (2) for the processing of oil contaminated with the adhesion of the body when in operation before the adhesive paste adequate degreasing treatment. Occur when dealing with inadequate adhesion and adhesive residue and other pollution problems. 
 3 When the process under severe conditions, please test the product thoroughly beforehand. 
 4, after peeling the tape surface in the adhesive coating, plating, etching, bonding and other processing, the ingredients of this product will trace the transfer of the adhesive, thereby causing some problems. Before use under actual situations thoroughly. 
 5 Painted boards, sometimes due to paint spraying conditions appear difficult to peel or strip the paint with the situation. Please evaluate thoroughly before use. 
 6. Alumite treated surface board, depending on treatment conditions, sometimes the SPV properties (peeling) will be different. Before use to be fully recognized. 
 7, especially for the natural substrate (marble, wood, etc.), please contact our representative in charge of this product. 
 8 The data in this data sheet is derived under certain conditions, determine the value of this product is not guaranteed. 
 9 This product may appear different conditions of use quality, performance and functionality of the differences in detail, please consult to the company staff. 
 10 This product may appear different to use the recorded data with different results. In order to more properly and safely use this product, ask the customer to be self-test before use. 
 11 This product may be no advance notice to stop production or change the specifications.